Installation Sheet

1. Prepare the Cabinet

IMPORTANT! Before installing this sink, verify that the distance to

the top of the doors (A) is greater than the apron height.

TIP: Apply painter’s tape to the cabinet to mark cuts and protect the

cabinet surface when cutting.

Measure and mark 7/8″ (22 mm) in from the outside edge of the

cabinet. Repeat for the other side.

Measure and mark 7″ (178 mm) from the top edge of the cabinet.

Cut the cabinet along the marked lines.

7/8"

(22 mm)

7" (178 mm)

Apron

8-13/16"

(224 mm)

Kohler Co. 3 1400421-2-A