Manualshelf

Installation Sheet

ManualsBrandsKohler ManualsKitchen SinksKohler Tailor 35-1/2" Farmhouse Single Basin Stainless Steel Kitchen Sink with Self-Trimming and SilentShield Technologies - Less Decorative Apron
12345678910
3. Install Support Framing
IMPORTANT! Horizontal and vertical support framing is required
to support the weight of the sink.
NOTICE: For proper countertop installation, the top of the sink
must not extend above the top of the cabinet.
Using 1x4s, construct support framing to extend along the inside
walls on each side of the base cabinet.
Position and level the support framing. The sink rim must sit at
or slightly below the top of the cabinet.
Secure the support framing with construction adhesive and
screws (not provided).
Cut four lengths of support framing from 1x4s to extend from the
bottom of the installed supports to the floor of the cabinet.
Secure the vertical supports with construction adhesive and
screws (not provided).
Support
Framing
1368036-2-A 6 Kohler Co.