Installation Sheet

Tools and Materials
Important Information
IMPORTANT! Refer to the “Roughing-In” section for cabinet
dimensional requirements.
IMPORTANT! Install this sink before installing the countertop.
Measure the cut-line from the front face of the cabinet.
IMPORTANT! Long screws may damage adjacent cabinets. Ensure
that the screws are long enough to secure the support framing, but
short enough so they do not extend through the walls of adjacent
cabinets.
Due to the nature of under-mount installations, Kohler Co.
recommends that only trained and experienced installers perform
under-mount sink installations.
Use proper fasteners and techniques to ensure that the frame will
support a minimum of 300 lbs (136 kg). Locate the fasteners for
easy access in the event the sink needs to be removed in the
future.
For K-22571 Only: This sink is intended for installation into a 30″
apron sink base cabinet.
For K-22569 and K-22570 Only: This sink is intended for
installation into a 36″ apron sink base cabinet.
Observe all local plumbing and building codes.
Plus:
• 1x4s
• Screws
100% Silicone
Sealant
Construction
Adhesive
1368036-2-A 2 Kohler Co.