Installation Guide

1010448-2-D
6
Kohler Co.
S Install the adapter on the transfer
valve using thread sealant. Tighten the
nut until the adapter is secure.
S Install the pipe fitting on the transfer
valve using thread sealant.
S Connect the plastic flexible hose to the
pipe fitting using thread sealant.
S Slide the sealing washer (tapered side
up) onto the transfer valve.
Transfer Valve
Adapter
Pipe Fitting
Plastic
Flexible
Hose
Sealing
Washer
Apply Thread
Sealant
Apply Thread
Sealant
S From the underside of the bidet, insert
the transfer valve up through the hole
so the pipe fitting and plastic flexible
hose face to the right side of the bidet
(as viewed from the front of the bidet).
S Install the second sealing washer
(tapered side down), flat washer, and
plastic nut onto the transfer valve.
S Securely hand-tighten the plastic nut.
Plastic Nut
Flat Washer
Sealing
Washer
Transfer
Valve
S Rotate the valve stem fully
counterclockwise (as viewed from the
front of the bidet).
S Install the spline insert on the valve
stem.
S Thread the escutcheon onto the
plastic nut.
S Position the handle with the pointer
toward the front of the bidet, and press
the handle onto the spline insert.
Handle
Escutcheon
Spline Insert
Valve Stem
Plastic Nut