Specification Sheet

2-1/4" (57 mm)
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
FreestandingInstallation:
CenterDrain location:
Blower motor requires remote installation.
46-3/4" x 21-5/8" (1187 mm x 549 mm)Basin area, bottom:
Relocate the blower motor and check valve
together. Do not move one without the other.
Provide access for servicing the blower.
69-15/16" x 34-3/8" (1776 mm x 873 mm)Basin area, top:
130 lbs (59 kg)Weight:
41.5 lbs/ft² (202.6 kg/m²)Minimum floor load:
16-1/2" (419 mm)Water depth:
71 gal (268.8 L)Water capacity:
Blower: 120 V, 10 A, 60 Hz, 300 WElectrical component
rating:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 05:37
Escale
®
6' BubbleMassage
™
Bath
K-14037-G