Specification

Technical Information
Fixture*:
Bathing well;
Basin area,
bottom
55-1/4″ (1403 mm) x 23-1/2″ (597 mm)
Basin area,
top
64-1/2″ (1638 mm) x 32″ (813 mm)
Weight 118 lbs (53.5 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 75 gal (284.1 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1042557-7
VHzA
Blower motor 120 60 10
Heated surface 120 60 0.5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/Heated surface 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 37
lbs/square foot (178 kg/square meter) loading.
Locate a GFCI-protected 120 V, 15A, grounded duplex
electrical outlet within 24″ (610 mm) of the blower motor.
2-7/8"
(73 mm)
3" (76 mm)
Drop-In Rim Detail
Recommended faucet area
1-1/2"
(38 mm)
1-1/2"
(38 mm)
19-1/2"
(495 mm)
3-1/2"
(89 mm)
1" (25 mm)
No change in measurements if connected with
drain illustrated. (K-11677)
21"
(533 mm)
1-1/2" Bath Drain
42" (1067 mm)
21"
(533 mm)
Lumbar
Angle 31˚
2-3/4" (70 mm)
72" (1829 mm)
11-1/16"
(281 mm)
Blower/Control Access
30" (762 mm) W x
15" (381 mm) H Min
Product Diagram
SUNWARD
®
SUNWARD
®
6’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201698-4-
A