Specification Sheet

19-1/2"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
CornerInstallation:
CenterDrain location:
Remote blower installation kit is available for
relocating the blower. Provide access for servicing
the blower.
52" x 38-3/4" (1321 mm x 984 mm)Basin area, bottom:
61" x 46-1/4" (1549 mm x 1175 mm)Basin area, top:
127 lbs (57.6 kg)Weight:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
39 lbs/ft² (190.4 kg/m²)Minimum floor load:
15" (381 mm)Water depth:
96 gal (363.4 L)Water capacity:
Blower: 120 V, 10 A, 60 Hz, 300 WElectrical component
rating:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 04:57
Tercet
®
5' BubbleMassage
™
Bath
K-1160-GF