Rough-In Guide

Product Information
Applicable product:
Drop-in rim style, custom pump K-1160-CD
Fixture*:
Bathing well:
Basin area, bottom 52” (132.1 cm) x 38-3/4” (98.4 cm)
Basin area, top 61” (154.9 cm) x 46-1/4” (117.5 cm)
Weight 127 lbs (57.6 kg)
To overflow:
Water depth 15” (38.1 cm)
Capacity 96 gal (363.6 L)
* Approximate measurements for comparison only.
Pump: 1-speed 120 V 60 Hz 7.5 A
Minimum access panel
pump/control (required):
20″ (50.8 cm) W x
15″ (38.1 cm) H
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″ (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
39 lbs/square foot (188 kg/square meter) loading.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
1-1/2" OD
3" (7.6 cm)
60" (152.4 cm)
27-1/2" (69.9 cm)
135˚
135˚
Recommended faucet area
35"
(88.9 cm)
63"
(160 cm)
60"
(152.4 cm)
35"
(88.9 cm)
Pump/Control Access
29" (73.7 cm)
13-1/8"
(33.3 cm)
4-7/8"
(12.4 cm)
43-3/4"
(111.1 cm)
19-1/2"
(49.5 cm)
21"
(53.3 cm)
1/2" (1.3 cm)
2-7/8" (7.3 cm)
2-7/8" (7.3 cm)
57-1/2"
(146.1 cm)
Drop-In Rim Style
Cut-Out Detail
Drop-In Rim Detail
1-1/2"
(3.8 cm)
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
29"
(73.7 cm)
1042006-1-C 2 Kohler Co.