Specification

Optional Accessories
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
Technical Information
Fixture*:
Basin area:
Bathing well 44″ (111.8 cm) x 36″ (91.4 cm)
Top area 56″ (142.2 cm) x 43″ (109.2 cm)
Weight 70 lbs (31.8 kg)
To overflow:
Water depth 15″ (38.1 cm)
Capacity 76 gal (288 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Heater: kW V Hz A
1.5 120 60 12.5
Required Electrical Service
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater: 120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24″
(61 cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
36 lbs/square foot (176 kg/square meter) loading.
Drop-in Rim Detail
1-1/2"
(3.8 cm)
Tile Flange Detail
1-1/4"
(3.2 cm)
25" (63.5 cm)
135˚
135˚
52-1/2"
(133.4 cm)
39-3/4" (101 cm)
13"
(33 cm)
4-7/8"
(12.4 cm)
Pump/Control Access
20" (50.8 cm) W x 15" (38.1 cm) H
26" (66 cm)
30-3/4" (78.1 cm)
56-1/2"
(143.5 cm)
30-3/4"
(78.1 cm)
54"
(137.2 cm)
26" (66 cm)
54" (137.2 cm)
2-5/8"
(6.7 cm)
20-1/2"
(52.1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
1/2" (1.3 cm)
1-1/2" OD
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Cut-out Detail
Drop-in Rim Style
Product Diagram
PROFLEX
®
5454
PROFLEX
®
5454 BATH WHIRLPOOL WITH HEATER
Page2of2
1012956-4-
E