Specification

Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
Technical Information
Fixture*:
Bathing well
Basin area, bottom 42″ (1067 mm) x 20″ (508 mm)
Basin area, top 51″ (1295 mm) x 24″ (610 mm)
Weight 135 lbs (61.2 kg)
To overflow
Water depth 14″ (356 mm)
Capacity 60 gal (227.1 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24”
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
50 lbs/square foot (242 kg/square meter) loading.
20"
(508 mm)
1-1/2" OD
2-1/4"
(57 mm)
2-1/2"
(64 mm)
1" (25 mm)
60" (1524 mm)
32" (813 mm)
16"
(406 mm)
9" (229 mm)
21-1/4"
(540 mm)
1/2"
(13 mm) R.
1-1/4" (32 mm)
Integral Flange
Detail
No change in measurements if connected with drain
illustrated. (K-7161-AF)
1-1/4" (32 mm)
3-1/2" (89 mm)
Product Diagram
PORTRAIT
®
PORTRAIT
®
BATH WHIRLPOOL WITH INTEGRAL APRON
Page2of2
1022467-4-
D