Dimensions Guide
Finished Wall
Notes
Required Electrical Service
Install this product according to the installation
instructions.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Select the type of fastener based on the wall
material. A minimum 20 lb (9.07 kg) load bearing
fastener is recommended.
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Install the fastener to a stud to avoid possible
property and product damage.
Wall mountMirror type:
A dimmer switch is required. This product is
compatible with most residential dimmer switches
intended for incandescent and dimmable LED
bulbs.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-20-2017 09:29
Verdera
®
Verdera Lighted Mirror
K-99573-TL