Installation Guide

3. Install the Drip Tray Mounting Plate

NOTE: The drip tray is an optional accessory available for wall

mount but not for ceiling mount.

NOTE: Install the 2x4’s so the drip tray is level or has a slight

forward slope to ensure proper drainage.

Attach a 2x4 ﬂush to the back of the wall studs to support the

lower lip of the drip tray mounting plate. Position the 2x4 so it

will be 2″ (51 mm) above the top of the bathing ﬁxture.

Attach a second 2x4 so it is 5-5/8″ (143 mm) above the ﬁrst 2x4.

NOTE: When 2x6 wall studs are present, install the 2x4’s so they

are supported 2″ (51 mm) from the back of the wall studs.

Attach the drip tray mounting plate to the 2x4’s using six drywall

or #10x1″ screws. Make sure the mounting plate is centered under

the spout’s location.

Bathing

Fixture

Drywall or

#10 Wood Screws

Install nut

and

washer.

Mounting

Plate

Backup

Plate

(51 mm)

5-5/8"

(143 mm)

2x4's

Stud

1006741-2-J 6 Kohler Co.