Installation Guide

TP-6906 4/16 37Section 1 Installation Instructions
1.11 OnCue Plus Generator
Management System
The OnCuer Plus Generator Management System is
included with model 24RCL, 30RCL, and 38RCLB
generators. OnCue Plus allows monitoring and control
of your generator set from a personal computer, smart
phone, or tablet. OnCue Plus can also b e configured to
send email or text message notifications in the event of
a generator set fault. See G18-247, Quick Start Guide
and TP--6928, OnCue Plus Operation Manual, for
instructions.
To use OnCue Plus, you must have the following
minimum requirements for connecting your generator to
the Internet:
D “Always-on” Internet service for generator set
connection (for example, cable, DSL, or phone line
modem connected 24 hours)
D Unused Ethernet port on a switch, router, or modem
D An uninterruptible power supply (UPS) for the
modem and router is recommended.
D 5E customer-supplied network cable for connection
of the generator set to the customer’s Ethernet router
(see installation instructions in Section 1.4.6)
D USB cable, male USB A to male mini-B, for updating
the controller firmware.
For instructions on connecting the network cables to the
generator set, see instructions in Section 1.4.6.