Dimensions Guide

L of Toilet
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Two-pieceToilet type:
NOTE: Product does not include a supply line,
as the length needed varies per installation.
Elongated frontBowl shape:
Quiet-Close
™
, Quick-Release
™
Seat hinge type:
For back-to-back-toilet installations: Use only a
45° double wye fitting.
2-1/8" (54 mm)Trap passageway:
10-1/2" x 7-7/8" (267 mm x 200 mm)Water surface size:
The model is acceptable for left-hand Accessible
compartment installations only.
6" (152 mm)Rim to water surface:
12" (305 mm)Rough-in:
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
5-1/2" (140 mm)Seat-mounting holes:
The Model Plumbing Codes require the
installation of elongated open-front toilet seats
on public bathrooms.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-3-2016 01:55
Cimarron
®
The Complete Solution
®
Toilet
K-98977