Dimensions Guide

Cimarron
®
Comfort Height
®
The Complete Solution
®
two-piece elongated toilet
K-22908
30-1/2"
(775 mm)
For Back-to-Back Toilet Installations
Use a 45° double
wye fitting.
Do not use a
double sanitary tee.
10-1/4"
(260 mm)
10-1/2"
(267 mm)
15-3/8"
(391 mm)
Front of Bowl
3/8" NPT
Supply
5"
(127 mm)
4-1/2"
(114 mm)
L of Outlet
C
2-3/4"
(70 mm)
12" (305 mm)
16-1/2"
(419 mm)
7/8"
(22 mm)
17-5/8"
(448 mm)29-1/2" (749 mm)
1-1/8"
(29 mm)
8" (203 mm)
Technical Information
All product dimensions are nominal.
Toilet type: Two-piece, Floor-mount
Bowl shape: Elongated
Trap passageway: 2-1/8" (54 mm)
Water Consumption
Full: 1.28 gpf (4.8 lpf)
Water surface size: 10-1/2" x 7-7/8" (267 mm x 200 mm)
Rim to water
surface:
6" (152 mm)
Rough-in: 12" (305 mm)
Seat-mounting
holes:
5-1/2" (140 mm)
Notes
Install this product according to the installation
instructions.
NOTE: Product does not include a supply line,
as the length needed varies per installation.
For back-to-back toilet installations: Use only a
45° double wye fitting.
This model is acceptable for left-hand
Accessible compartment installations only.
ADA, OBC, CSA B651 compliant when
installed to the specific requirements of these
regulations.
Plumbing codes may require elongated toilets
and elongated, open-front seats in public
bathrooms.
Accessibility standards may require controls to
be located on the open side of the toilet.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.