Dimensions Guide

Technical Information
Fixture:
Configuration two-piece, elongated
Water per flush 1.28 gpf (4.8 lpf)
Passageway 2-1/8″ (54 mm)
Water area 11″ (279 mm) x 8-3/4″ (222 mm)
Water depth from rim 6″ (152 mm)
Seat post hole centers 5-1/2″ (140 mm)
Included components:
Bowl K-4306
Tank K-5380
Tank cover 1211811
Trip lever, left-hand 1211810
Toilet seat K-4774
Tank attachment kit 1016548
Bolt cap accessory pack 1013092
Wax ring and hardware installation kit 1023457
Installation Notes
Install this product according to the installation guide.
For back-to-back toilet installations: Use only a 45° double
wye fitting.
Will comply with the American Disabilities Act (ADA) when
installed per the requirements of the 2010 ADA Standards for
Accessible Design, Section 604 Water Closets, of the Act. The
Model Plumbing Codes require the installation of elongated
open-front toilet seats in public bathrooms.
The model is acceptable for left-hand Accessible compartment
installations only.
Will comply with CSA B651 when installed per Clause 4.3.6
of the standard.
Will comply with OBC when installed per Clause 3.8.3.8 and
3.8.3.9.
16-3/4" (425 mm)
Front of Bowl
30" (762 mm)
12" (305 mm)
3/8" NPT Supply
9" (229 mm)
9-3/16"
(233 mm)
30-1/2"
(775 mm)
16-1/2"
(419 mm)
5"
(127 mm)
15-3/4"
(400 mm)
10"
(254 mm)
9/16"
(14 mm)
9-3/8"
(238 mm)
3-1/2"
(89 mm)
4-1/2"
(114 mm)
2-3/8"
(60 mm)
Do not use a
double sanitary tee.
Use a 45˚ double
wye fitting.
For Back-to-Back Toilet Installations
C
L of Toilet
Product Diagram
ELLISTON
®
ELLISTON
®
THE COMPLETE SOLUTION
®
TOILET
Page2of2
1212208-4-
B