Dimensions Guide

No change in measurements if connected
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzPump:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Drop-inInstallation:
EndDrain location:
The suction line extends 4-5/8" (117 mm) beyond
the edge of the rim. The pump base extends 1/8"
55-1/4" x 23-1/2" (1403 mm x 597 mm)Basin area, bottom:
64-1/2" x 32" (1638 mm x 813 mm)Basin area, top:
(3 mm) beyond the edge of the rim. Modify the
framing as needed.
110 lbs (49.9 kg)Weight:
36 lbs/ft² (175.8 kg/m²)Minimum floor load:
15" (381 mm)Water depth:
75 gal (283.9 L)Water capacity:
Drop-in, 1042557-7, required, includedTemplate:
Pump: 120 V, 7.5 A, 60 HzElectrical component
rating:
SinglePump speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-28-2017 02:45
Sunward
®
6' Whirlpool Bath
K-1164-S1