Cut Sheet

ManualsBrandsKohler Power ManualsAutomatic Transfer SwitchesRXT ATS - 200A, Service Entrance, Automatic Transfer Switch, 240VAC, 1PH, NEMA 3R

RXT ATS - 200-amp, Service Entrance

Model Number: RXT-JFNC-200ASEQS4

Phase: Single Phase

Overview:

It's the brains behind your generator system. The

automatic transfer switch (ATS) continuously

monitors the power coming from your utility. When

the power goes out, the ATS automatically transfers

power from the utility to your generator. When utility

power is restored, the ATS turns off your generator

and transfers back to power from the utility grid.

Features:

• Designed for use only with KOHLER generators equipped with RDC2 or DC2 controls

• Available in service-entrance models

• Includes RXT single phase combined interface/load management board

• Optional external LED display or optional external LED display with load management

• Corrosion-resistant aluminum enclosure

Specs:

Does Not Include:

• Accessory board with audible alarm, input and output connections, 2-week exercise option, and 10-

minute load control delay option

• External alarm module available for remote status indication and remote generator set start/stop

• Common / fault relay

• All-in-one main distribution panel and ATS

Amps:

200

Transfer Switch Type:

Service Entrance

Phase:

Single Phase

Load Center:

Without Load Center

Voltage @60 Hz:

240

Load Control Time Delay:

Yes

Frequency:

60 Hz

Enclosure Material:

Aluminum

Wires:

Enclosure Type:

Indoor or Outdoor

Poles:

Certifications/Listings:

UL Listed

Country of Origin:

Controller:

RDC2/DC2

Generator Compatability:

All single

-phase KOHLER Generators with RDC2 or DC2 controllers

Load Shedding:

Includes Load Shedding Capability

Position Indicating LEDs:

Optional

Source Available Indicating LEDs:

Optional

Weight:

26 lbs. (12 kg)

Dimensions:

734 mm x 416 mm x 175 mm (28.9 in. x 16.4 in. x 6.9 in.)

Warranty:

year, 2000-hour limited warranty