Download

5. Install the pop filter and sponge ball as shown below. Connect the audio cable
and route it through the shock-proof stand.
6. After the microphone is installed and connected, plug the audio cable to the sound
card and connect the sound card to the computer – alternatively, the audio cable
can be connected directly to the computer.
Polar pattern Unidirectional
Frequency response 20Hz-20kHz
Sensitivity -34dB±2dB (0dB=1V/Pa at 1kHz)
Output impedance
150Ω±30% (at 1kHz)
Load impedance
≥1000Ω
Equivalent noise level 16dBA
Maximum SPL 130dB (at 1kHz ≤ 1% T.H.D)
S/N Ratio 78dB
Electrical current 3mA
SPECIFICATIONS