WARNING AND PRECAUTION Read all of tha instructions ha fare operating tha set. Keep these instructions wall for later use. p [TXT] A WARNING: TC REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE GOVERNOR BACK]. NO USER SERVICEABLE PARTS INSIDE. REFER TG QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, wit in equilateral triangle, i intended to alert the urea to the AN province of uninitiated * dangerous voltage to constitute a risk of electric shock to parsons.
CAUTION: These servicing Instructions are for usa by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating Instructions unless you ate qualified not Install this equipment In a confined or building-in space such as a book case or similar unit, and remain a wall ventilation conditions at open site.
# Never place a television set In an unstable location. A television set may fall, causing serous personal injury or death. Many injuries, particularly to children, can ba avoidant by taking simple precautions such as: Using cabinets or stands recommended by the manufacturer of the television set. Only using furniture that can safely support tha television set. Ensuring the television set is not overhanging the edge of the supporting furniture.
Mode! Size “ Yor | bem Declamatory) Me Mé der rn [oot] Min i) + Say | we Tomes Note: 1. The pictures sre only for reference. 2. For tha TV sets with terminals towards tha wall, In ardor to leave enough space to use the terminals, a plastic ‘spacer is knead together with ach craw to fix the wail mount. It is a small hollow pillar, the height of which 1s 230mm. Precautions For Using Remote Control ® Use the remote control by painting it towards the remote sensor.
Installation of Restraining Bracket (Only for some countries or models) To prevent the TV from toppling over by some sudden circumstances lke earthquakes, shock, climbing by a child, etc. you are asked to Install ‘the restraining brackets before using the TV according to tha following Instructions and pictures: 1) Take out the accessories supplied with the TV from the package.
PREPARATION Unpacking and Installation ery 1 3 4 Open the package. Take out the TV. Install the TV stands. Connect the power cord.
TERMINAL CONNECTION + VAIN i. oS Receive audio antipodean signals from ay [wn | {Omar =r j= / devices such as DVD. = ANT. Cantankerous TV Connect a coaxial cable ta receive signals from [ar | ood the antenna or cable. + USB Conn act a USB storage device. Curricular HDMI Bacall / OD Overactive 4K video input signal from HDMI devices. [Cm] iron — / = such as DVD. Nita: HDMI supports Marcia Re tum Channel ‘and you can tonne ARC-repainted device with Sha TV by HOM terminal.
REMOTE CONTROL 1. POWER { Tum the standby mode. 2. MUTE {ik }: Mute or restore the TV sound. 3. Number buttons Select the channel directly, of Input a number. 4. SOURCE: Sal act the Input source. 5. INFO: Access the INFO Interface. 6. MENU: Access the menu of quick settings. 7. HOME: Access the home page. 8. Navigation Buttons (a 4D) Navigate the menu to select the content you need. 9. 0K: Confirm, enter or acutes the salted item, or show tha list of Quick Button. 10. EXIT: Exit the current operation. 1.
BASIC OPERATION E-Manuel is built into your TV and can be displayed on the screen. To meal more about your TV features, access your E-Manual by referring to the fal waling. E-Manual may not be available depending on the region ar model. 1. Crass HOME button to access the home page. 2. Press and 0K button to select and enter “E-Manual” in “Apps”. TV Control Button u In standby mods: Short press TV control button to tum on the TV.
TROUBLE SHOOTING Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions. General Problem / Solution + Remote control does nat work Chang the batteries. Check If batteries are Installed correct. Check If main power Is connected. Check If there are some Tams between remote sensor and remote control. = Poor Signal This Is usually caused by Interference from electronic equipment of radio Interference sources.
SPECIFICATION Working voltage: Hz Dimensions without stand 1284.5X 764.2 X BB. Amm (WXHXD): Net weight without stand: Neo RF aerial input: 75 ohm unbalanced Language of OSD: Multiple options System: DIV: DVB T/12/C ATV: PAL BG/I/DK Channel coverage: MHz ~ 230 MHz, 470MHz ~ 860 MHz DB-C: 48 MHz ~ 869 MHz ATV: 47.25 MHz ~ 865.
Need more information? This is a Quick Start Guide, and while we hope that this has given you the assistance needed for a simple set-up, a full user guide outlining all of this product's instructions and features can be found online at help.kegan.
