Download

ASSEMBLY:

1) Carefully remove all parts from the cardboard cartons and lay them on a table or floor in order to take an

inventory of all the pieces. Keep your box for storage or in case you ever need to ship your telescope.

2) Spread the three legs of the table-top tripod apart and gently press down on the

center of the tripod supports until they lock into place. (Picture #1)

(Picture #1)

3) Place the telescope tube over the altazimuth mount. Lower the telescope tube onto the mount so that the

plastic tongue on the mount slips into the bracket underneath the telescope tube. (Picture #2)

(Picture #2)

4) One of the short bracket arms has a hexagonal shaped cutout around its opening. Insert the nut from the

altitude lock knob into this cutout. Insert the altitude lock knob through the bracket and tongue as shown in

Picture #3. Turn the altitude lock knob clockwise into this nut until it stops.

(Picture #3)