Download

The app supports two configurations: Default mode and AP mode (Wi-Fi direct). Click "AP
Mode" at top right of the "Default mode" page (or vice versa) to toggle between modes.
For "Default mode", the indicator light on the smart device should be flashing rapidly (twice
per second).
If the indicator light is not flashing rapidly, click to view the instructions.
Default mode: rapid flashing
1. Power on the device. Power off after 10 seconds and then power on.
2. Turn On-Off-On-Off-On (Keep time interval. not too short, turn off after light is on).
3. Confirm that the light bulb is now rapidly flashing.
AP mode: show flashing
Repeat the above; then, once the light is rapidly flashing, turn it on-off-on-off-on until the
light starts slowly flashing.