Download

Sweep/Pause:
• After the machine has started, press the button on the vacuum or start the
machine using the mobile app, press any button to pause when in use.
Charging
•
Automatic mode: The vacuum will return to the charging base automatically after
it is finished.
•
Manual mode: Press the button to start charging. The indicator will illuminate
and slowly flash.
Note: If the vacuum fails to locate the charging base, it will return to its original position
automatically. Please put the vacuum back to the charging base manually.
Fixed-Point Cleaning
• If a specific area requires deep cleaning, and you select a point on the map in the
app, the robot will move near to the area automatically and sweep the floor in a 2m
square. By default, it will clean the area twice, but the number of times can be set
in the app.
Cleaning Mode
• After the robot starts, it will scan and generate a map and divide it into areas
automatically. The robot vacuum will vacuum areas one-by-one in an efficient
pattern. The machine will return to the charging base automatically after it is
finished, or if it is low in battery.
Note: Please do not move the machine during use. If the machine is moved, please put it
back in the position it was in and it will attempt to reposition itself when it restarts. If it is
relocated successfully, the vacuum will continue working according to the planned route. If it
is not successfully relocated, the robot will rebuild the map, but may not be able to be
charged without manual intervention.