Download

Open Window Detection
• If the room temperature remains below 5°C following a consecutive 3 minutes of use,
the heater will assume a window is open and begin monitoring the room temperature.
• If the temperature has not risen above 5°C after an additional 7 minutes (10 minutes in
total), the heating function will be turned off to conserve energy.
• A warning alarm will beep to notify the user, and the error code ‘E4’ will be shown.
• Please note that this will not be activated during the initial 5 minutes of use.
NOTE: After 10 seconds without any operation, the display will go into stand-by. Press any
buttons to illuminate.
Flame colour display
Flame brightness display
Temperature
Wi-Fi
Low Heating
High Heating
DISPLAY