Download

Note Counter

KABNKNTCNTA

Quick Start Guide

Basic Usage

Automatic operation to manual operation:

The machine automatically defaults to automatic operation upon start-up. To

switch to manual use, press and hold the 'RESTART' key for 3 seconds until the

machine displays 'No'. Press the 'RESTART' key again to save it.

Ultraviolet Detection

In order to turn on the ultraviolet detection of the machine, press the 'UV' key

until the UV light turns on.

To turn ultraviolet detection off, press the UV key once again.

Magnetic Detection

In order to turn magnetic detection on, press the 'MG' key until the MG light

turns on. To change the position of the magnetic sensors, press the 'MG' key

again to turn the MG2 light on.

Please note: Australian currency does not have magnetism security.

Please note that the new Australian $5 note will be detected as fake with

magnetic detection on.

Addition

In order to turn on bank note addition, press the 'ADD' key until the ADD light

turns on.

To turn adding off, press the 'ADD' key once again.

Batching

The bank note counter can batch money together into pre-set values.

Press the 'BATCH' button on the machine to show '100/50/20/10'.

PAGE 1
Note Counter KABNKNTCNTA Quick Start Guide Basic Usage Automatic operation to manual operation: The machine automatically defaults to automatic operation upon start-up. To switch to manual use, press and hold the 'RESTART' key for 3 seconds until the machine displays 'No'. Press the 'RESTART' key again to save it. Ultraviolet Detection In order to turn on the ultraviolet detection of the machine, press the 'UV' key until the UV light turns on.
PAGE 2
Settings Fake Note Recognition Fake note recognition alerts the user to counterfeit currency. To turn fake note recognition on, hold the '-' key for at least 3 seconds until the machine displays 'U-01'. To turn it off again, briefly press the '-' key again until the machine displays U-00. Press the 'RESTART' key to save your changes. Double Note Recognition Double-note recognition alerts when two notes have been fed simultaneously.
PAGE 3
Factory Reset In order to perform a factory reset, hold the '+' key for at least 3 seconds until the machine shows '---'. Press the 'RESTART' key to save your changes. Sensitivity Press the 'MG' and 'RESTART' buttons at the same time until the machine shows H-01. After that, press the 'ADD' or ' BATCH' buttons to switch from each setting, or press 'MG' or 'RESTART' to change other parameters. View the Code reference for further details.