NC35 NOISE CANCELLING HEADPHONES (BLACK) KANC35HRABLK
OVERVIEW Headphones ① Microphone ② ANC Switch ③ LED Indicator ④ USB-C Charging Port ⑤ 3.
OPERATION Power on/off • To turn the headphones on, press and hold the Power button (9) until the Status LED (3) blinks BLUE and RED. • To turn the headphones off, press and hold the Power button again until the Status LED blinks RED. ANC on/off • To turn noise cancellation on, short press the ANC switch (2). The LED indicator (3) will light up GREEN. • To turn noise cancellation off, short press the ANC switch. The ANC LED will turn off. Charging 1.
Line-in 1. Turn off the Bluetooth and connect the microphone end of the supplied audio cable to the audio input socket (5) on the headphones. 2. Connect the other end of the audio cable to the audio source. Notes: You must turn the headphone off before connecting the cable if the Bluetooth mode has been activated. If the battery is depleted, the noise cancellation must be turned off if you want to use the 3.5mm audio cable.
SPECIFICATIONS Bluetooth Version V 5.3 Driver Size 40mm Impedance 32Ω Sensitivity 110±3dB Frequency Response 20 Hz - 20kHz Working Distance Up to 10m Cancellation Frequency Range 40 Hz - 600 Hz Cancellation Central Frequency 100 Hz - 300 Hz Cancellation Level 20 dB±2dB Battery Capacity 3.7V,200mAh Charge Input 5 V,200mA Charge Time 2 Hours Working Time Up to 27h (21h with ANC ON) Charging Port USB-C Charging Cable Length 30cm Audio Cable Length 1.
NOTES
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.
