M8 PRO CORDLESS 22.
SAFETY & WARNINGS When using an electrical appliance basic safety precautions should always be followed including the following: • Read all instructions. • Do not use near stairs or on balconies. This appliance does not have a “no avoidance” sensor. • Children aged 8 years and above or persons with reduced physical, sensory or mental capabilities should only use this appliance while under supervision or instruction from an adult or carer.
• Do not dispose of batteries with household waste. Dispose of them in accordance with your local regulations. • The cable on the Power adapter cannot be replaced if damaged. Instead the Power adapter must be replaced by Kogan.com or a service agent on Kogan.com's behalf. • This appliance contains a non-replaceable battery. Power adapter • WARNING: The Power adapter must be removed from the power outlet before cleaning or performing any maintaining on this appliance.
OVERVIEW 1 Detachable battery pack 11 Floor brush release button 2 Ergonomic handle 12 Floor brush 3 Indicator lights 13 Crevice head 4 Outlet filter cover 14 2 in 1 brush head 5 Dust tank 15 Wall mount with removable sticker 6 Dust tank release button 16 Floor brush switch 7 Metal tube release button 17 Power level buttons (3 levels) 8 Metal tube 18 Power button 9 Accessory support 19 Battery 10 Power adapter 20 Water tank
INSTALLATION Metal Tube 1. Insert the metal tube into the main body until a ‘click’ sound is heard. 2. Press the metal tube release button and remove the tube. Floor Brush Installation 1. Insert the floor brush on the end of the metal tube until a ‘click’ sound is heard.
2. Press the floor brush release button to remove the floor brush. Water Tank Installation 1. Position the cloth to the base of the water tank. 2. Attach the water tank with floor nozzle, keep the magnetic cells both on nozzle base and water tank together. 3. Fill the water tank with water. Note: The floor brush, crevice head and 2 in 1 head can be directly connected to the main body or metal tube.
Dust Tank Installation 1. Insert dust tank into the main body and twist counter-clockwise until a ‘click’ sound is heard. 2. Holding the opening part connected to the tube, twist clockwise to remove it.
Battery Installation 1. Install the battery into the bottom of the main body until a ‘click’ sound is heard. 2. Press the battery release button to remove it.
OPERATION Before First Use Unpack the appliance and any accessories. Dispose of the packing materials. Ensure all packing material around the appliance and the protective elements inside the appliance compartments are removed prior to first use. • Carton board and the sheets of paper included are recyclable. They must be disposed of in the appropriate recycle bin.
Indicator Lights (All green colour) Status Sequence During charging Charging from low to high: lights will flash sequentially until all three lights are on (fully charged). Fault All three lights flashing at the same time, please check if the brush roller is stuck or contact Kogan.com. Indicator Lights During discharging or Discharging from high to low, lights flash sequentially until last use light flashing. Out of power Last light flashing until power off, please charge.
Setting the Power Level • Select the appropriate accessory for your cleaning task. • Press the power button, the vacuum will switch on. Press the power button again to switch it off. • Press the ‘+’ or ‘-’ power level button to adjust between the three suction power levels. Emptying the Dust Tank • Press the dust tank release button to empty the dust when finished cleaning. • Close the dust tank cover when it is empty.
1. Ensure the bottom line of removable gel sticker is 940mm from to the floor, stick it to a clean vertical surface (wooden, ceramic etc.) (the gel sticker is washable). 2. Adhere the magnetic wall mount to the gel sticker. 3. Place the appliance on to the magnetic holder. CLEANING & CARE Cleaning the Dust Tank and Filters Note: Clean the dust tank and filters monthly to maintain the performance. 1. Holding the opening part connected to the tube, twist clockwise to remove it.
2. Lift out the filter cover and separate the HEPA filter from the filter cover by twisting counter-clockwise and pulling out. 3. Clean the dust cup and filters under running water. 4. Ensure the filters are completely dry before reassembling.
Post-Motor Filter Cleaning Note: Clean the post-motor filter every 6 months. 1. 2. 3. 4. Rotate the filter cover counter-clockwise to remove it. Lift out the post-motor sponge filter. Shake to remove dust. Wash the filter under cold running water. Ensure the filter is completely dry before reassembling. Floor Brush Cleaning 1. Using a coin press down and turn the fastener counter-clockwise to unlock. 2. Remove any hair and debris around the brush roller. 3. Wash the brush roller under running water.
4. Ensure the brush roller is completely dry before reassembling. 5. To reassemble, install the brush roller inside the original place. Using a coin press down and turn the fastener clockwise to lock. Water Tank Cloth Cleaning 1. Wash the cloth under running water. 2. Ensure the cloth is completely dry before assembling. 3. Keep water tank separate from the nozzle after scrubbing the floor to avoid dripping of water.
Disposal This marking indicates that this appliance should not be disposed with other house-hold wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. SPECIFICATIONS Power supply Rechargeable battery Motor max. power 200W Battery Li-ion DC 22.2V 2000mAh Charging time Max. 4-5 hours Capacity of the dust tank 0.
TROUBLESHOOTING If you encounter a problem with your device or if you suspect the device is not working properly, you can make a few simple checks before contacting Kogan.com. Problem No power Loss of suction Solution Before using the appliance, check that it is fully charged, empty the dust tank and clean the filters. Check to see if the openings are clogged. Unplug and clean if necessary. Make sure the filters are correctly installed. Empty the dust tank and clean the filters.
NOTES
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.
