M3 FULL TOUCH SMART WATCH KAM3FTHWCHA
SAFETY & WARNINGS Battery Warning Do not disassemble, puncture or damage the battery. Do not disassemble the built-in batteries of devices with non-replaceable batteries. Do not use sharp objects to remove the battery. Health Warning If you are wearing a pacemaker or other implanted electronic device, please consult your doctor before using the heart rate monitoring strap. The watch’s optical heart rate sensor glows green and flashes.
APP INSTALLATION 1. Turn On Automatically turns ON after charging. Note: The watch must be charged and activated before the first use. Please use the original power adapter to charge the watch. Turn on by pressing and holding the DOWN button. 2. Download and Install VeryFitPro You can directly scan the QR code to download VeryFitPro or search "VeryFitPro" in the APP store to download and install.
Note: Specifications required by hardware platform system are as below. iOS 9.0 and above Android 4.4 and above Bluetooth 4.2 3. Please connect to mobile phone correctly. Correct operation: Pair the watch via VeryFitPro APP on your phone. Incorrect operation: Pair the watch directly via Bluetooth in phone Settings. 4. Bind the Watch Drop down on APP home to show binding request. Select product model and tap “Confirm Binding” to complete binding.
OPERATION Up Button Screen Down Button 1.
During sports paused: Stop sports Pop-up interface: Cancel/close During stopwatch operation: Count During timer operation: Stop timekeeping and quit Other interfaces: Return to previous interface/dial Press and hold Turn on/turn off 2.
Sports Functions 1. Activate Sports Enter sports list interface, slide up or down to select sports item and tap icon to start sports. 2. Start Sports When sports function is activated, the watch will show sports countdown. Sports function starts after the countdown. 3. Operations during Sports Press UP/DOWN Button to Unlock In screen locked state Press and hold UP Button to Pause Sports.
4. Reminders during Sports Heart Rate Reminder During sports, the Watch will continuously detect the current heart rate. If current heart rate exceeds the maximum heart rate, the Watch will alert to reduce sports intensity or stop sports through vibration and interface alarm. Set your safe heart rate reminder through More > Heart rate zone > User defined Maximum heart rate in the mobile APP. 5. Pause or Stop Sports Pause sports: In the unlocked state, press and hold UP button to pause sports.
Enter Health Data interface to view the accumulated steps, calories and distances when wearing the watch that day. 2. Notifications Turn on smart reminder Enables notifications for various functions when enabled through the “Smart Reminder” on the APP. This function requires a constant connection between the watch and mobile phone. View message When receiving a message, the watch will vibrate to alert. If the message is not immediately viewed after being received, slide down to view the message.
The Watch supports heart rate detection. Slide to Heart Rate Detection interface, hold for two seconds, the Watch will automatically detect heart rate. Please stand still during the detection so that the watch can output more accurate heart rate data. Note: To improve the accuracy of heart rate detection, please wear the watch correctly and keep the parts in contact with skin clean. 4. Weather Weather function allows you keep track of the weather in your city.
Call reminder Call reminder can be set in mobile APP. This functionality requires a constant connection between the watch and the APP. When there is an incoming call, the watch will alert through vibration. Close the call pop-up by pressing UP/DOWN button. 6. Control Centre DND (do-not-disturb) mode Slide up once on dial interface and enter control centre interface. Tap DND icon lighten the icon off. to . DND mode is on. Tap DND icon again to dim the icon.
SPECIFICATIONS Battery Capacity 260mAh Screen model 1.3" TFT-LCD (Round） Charging time ≤2 hours, 25°C Constant temperature Working voltage 3.8V Waterproofing grade 5ATM Battery duration 7 days (dependant on usage) Working temperature -10 - 45°C Bluetooth version BLE4.2 Product frequency 2402-2480MHz Product weight 56.
TROUBLESHOOTING Problem Solution Mobile phone cannot be connected to the watch 1. It is recommended to update Very FitPro to the latest version. 2. It is recommended to quit all APPs, reactivate the phone Bluetooth and re-connect. 3. Confirm that system of the phone is Android 4.4 or iOS9.0 and above. The watch has no message or call reminders 1. It is required to turn on smart reminder function and call reminder function in APP and synchronise to the Watch. 2.
Need more information? This is a Quick Start Guide, and we hope that this has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.
