LP1 ELECTRIC GUITAR WITH AMP AND ACCESSORIES RYLP1EGPBKA, RYLP1EGPVBA
SAFETY & WARNINGS Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference. • Avoid use in direct sunlight or areas with extreme temperatures, high humidity, excessive dust, dirt, vibrations, or close to magnetic fields. • Ensure to turn off the amp and tuner when not in use. • Remove the battery if the tuner will not be used for extended periods.
GETTING STARTED Congratulations on your new Royale guitar! Out of the box, your guitar’s strings will be loose and require a full tune up. The clip on tuner requires x1 CR2032 button battery to operate. Please note that a new guitar’s wood will take 2-3 days to stabilise to the new temperature, and as such will not stay in tune as long. Once stabilised, the strings will hold tune correctly.
OVERVIEW Guitar Tuning pegs Nut Headstock Truss rod Fret Fret markers Neck Strap button 3-way pickup switch Neck pickup Volume controls Bridge pickup Bridge Output jack Strap button Tone controls
Clip on tuner 4 1 2 3 1 Display 2 Power button 3 Clip 4 Battery cover Display 7 5 6 8 5 String number 6 Tuning mode 7 Meter 8 Note name
Amp control panel 10 11 12 13 14 15 16 17 9 9 Input jack 14 Middle control 10 Volume control 15 Bass control 11 Drive control 16 AUX in jack 12 Gain control 17 Headphone jack 13 Treble control 18 Power switch 18
BEFORE FIRST USE Installing the battery on the tuner Press and slide off the battery cover. Matching the polarity markings (+/–), insert a CR2032 battery (not included) into the battery slot, then place the battery cover back on. OPERATION Tuning Guitar strings naturally fall out of tune, not only from regular playing, but also from temperature changes throughout seasons. The most common tuning for guitar is ‘E Standard’.
Clip on tuner 1. Press and hold the power button for 2 seconds to turn on the tuner. 2. This tuner features multiple tuning modes that suit multiple instruments (chromatic, guitar, bass, violin, and ukulele). Press the power button to cycle between the modes. The selected mode will be reflected on the display. Select the ‘Guitar’ tuning mode. 3. Clip the tuner onto the headstock of the guitar. 4. Play a single string on the guitar. The note name and string number will be shown on the display.
Adjusting the truss rod: Only adjust the truss rod if you are confident in your understanding and abilities. It is otherwise highly recommended to take the guitar to a professional guitar store for a set-up if the neck alignment needs correction. 1. Clip the capo onto the 1st fret on the guitar. 2. Insert a 0.254mm feeler gauge (not included) in between the string and the 12th fret. The feeler gauge should be able to touch the fret and string, without the string moving.
Amp • Plug the power cord of the amp into an outlet. • Plug one end of the guitar cable into the output jack of the guitar. Plug the other end into the input jack on the amp. • Toggle the power switch to the ‘I’ position to turn on the amp. Once turned on, there are a few settings that can be adjusted using the knobs and switches. Volume Controls the volume of the amp. Gain Increasing this setting will increase the level of distortion in the sound.
RESTRINGING Over your guitar’s life, it will be necessary to change the strings. Strings break if overtightened or strummed too heavily, but even if not broken, strings will sound dull and less vibrant over time. A fresh set of strings will bring new life to an old guitar. 1. To change your guitar strings, first loosen the current set by turning the tuning pegs until each string is loose. When fully loosened, you will be able to remove them from the headstock easily. 2.
CLEANING & CARE • Wipe the guitar with a clean, dry cloth. • Maintain the moisture content of wood consistently at an appropriate level. Note: Do not use flammable liquid cleaners (for example, benzene) on this guitar. Storage • Loosen the strings before storage or transport. • Replace your guitar strings every 6–8 weeks if used regularly. • Store the guitar in a cool, dry place. Notes: • Do not keep your instrument near a heating vent, radiator, in direct sunlight, or near a window.
SPECIFICATIONS Amp Wattage 10W Clip on tuner Tuning modes Chromatic, Guitar, Bass, Violin, Ukulele 2-colour backlight Green – in tune, White – out of tune Pitch range 440 Hz Detection accuracy ± 0.
NOTES
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.
