User Guide

1. Place the beverage cooler on a stable flat surface in a well-ventilated area. Ensure

there is at least a 30cm clearance above, and at least a 10cm clearance on the sides

of the beverage cooler. Rotate the levelling feet if the beverage cooler is unstable.

2. Plug the power cord of the beverage cooler into a socket. When plugged in for the

first time, wait for 30 minutes to allow the beverage cooler to cool.

OPERATION

30cm

10cm

Note:

Water droplets or frost may begin to form at the back of the beverage cooler. This is

due to the compressor and is normal. The water droplets and/or frost will evaporate

and defrost over time.