COMPONENTS = A Koran 42° SMART TWEEDLEDEE B Remote control © Stand x2) D Taxidermist screw (dd) E AAA battery 2) F Quick-start guide & Warranty cord NOT INCLUDED Phillips head screwdriver, antenna cable, broadband interment connection,
REMOTE CONTROL OVERVIEW 1 Power ib) 2 Mute (1) 3 Number keys 42 SAD LIST FAVE 8 GUIDE 9 NETFLIX 10 shebang 1 YouTube 12 videotape 13 Menu (85 14 Home (A) 154.0.AY 16 OK 17 Re tum 18 Exit (8) 19 20 CH¥/= (APY) 218 25] 23 Red key Green key Yellow key Blue key 24 AUDIO 25TTX 26 SUBTITLE 270 28 bb] 29 led Record (4) 3m 341 35 b> (play) Switch between working and standby status. Tum on/off the sound. Select the channel or input numbers, Return to previous channel. Tum on/off the associated audio.
ASSEMBLY AND INSTALLATION BEFORE YOU GET STARTED Spread cushioning ott to lay tha TV on. This will help to contravene dormant. 1. Stoned assembly a Attach stands to base of TV. b. Insert two ST4xI2 mim flat tail serf-tapping screws for each stand, and use Phillips head screwdriver {not supplied) to tighten. fo a 2. Promote control assembly a. Open the battery compartment cover on the back side. b. Insert two 1.
ASSEMBLY AND INSTALLATION 3. Conn act to antenna a. Connect an antenna cable {hot supplied) via the ‘ANT input port ot. the back of the TV. b. Ensure the antenna cable is also connected to a working antenna, either via an antenna wall socket in your home, or directly. Anteing wall socket Ira © Antenna cable {not supplied) 4. Turning TV on Connect the power supply, enter the standby mode, press the power button of the TV or the power button on the remote control to tum on the TV.
Sip a Tha first time you swish your TV on, it wil automatically be In the nail setup mode. This wil guide you through the whole setup process of selecting your desired language, connecting to the Interment, signing In te your recount and wring in TV channels. Cheesing Your OSD Language 1}. Praiseworthy buttons to Highlight your inside OSD language then press the OK bunion, 2), Press 4% the buttons to select your country where you will operate the TV. Press the OK button to confirm.
3). Dora Collection and Firework Updates Notices page will appear. Press tha bunions to select the menu option. 4). Press the 4 button to select the network type.
BASIC OPERATIONS Signal source selection You can connect various devices to the TV set and view high quality images. If the video device has HDMI, AV and other video output ports, you can select one of them and connect to corresponding input ports of the TV set. After connected, turn on the device and press [£1] key, then menu of signal source will be displayed on the screen. Press key to select the input signal, and press [OK] key to confirm.
BASIC OPERATIONS Smart TV Press key to show the home page. 1. Press key to select an application; 2. Press [OK] key to run the application; 3.Press [B] key to exit the smart mode. Note: Before accessing the Internet, please connect your TV set to the Internet. Refer to “Network Settings* for details. * YouTube ee Channel scanning Scan the channels before watching the TV for the first time.
BASIC OPERATIONS ATV Scanning After selecting ATV source, press [8] key, and Select TV, then press [OK] key to enter. 1. Select Channel Scan, and press [OK] key, then the machine starts auto scanning. 2. Select Analog Manual Scan, and set Start Frequency (MHz). Select Scan Up or Scan Down, and press [OK] key to manually search for channels. DTV Scanning After selecting DTV source, press [85] key, and select TV > Tuner Mods > DVBT/DVBC according to your needs. After select DEBT. 1.
BASIC OPERATIONS APP Press key, then press key to select an application and press [OK] key to enter. As to YouTube, prime video, net range and Netflix, you can press the [YouTube], [prime video], [net range] and [NETFLIX] keys to use them, In the standby mode, you can turn on the TV and use Netflix by pressing [NETFLIX] key on the remote control. Mow with ci ci oe Network settings Press [BH] key, then select Setup > Network > Configuration > Interface, select Wireless or Ethernet. HW Wireless 1.
BASIC OPERATIONS Wake On Lan / Wake On Wain It allows remote systems to wake up the sleeping TV by sending a frame of a specific format which the client anticipates. (It is available when network is connected.) Press [#8] key, then select Setup > Network > Configuration > Wake On Lan / Wake On Wain, and press [OK] key to enter.
Poor replete and sound quality + Try a different channel Adjust the antenna + Check all connections No lecturers or sound In TV status » Try another channel + Press the HEAVYSET button « Aka sure TV is plugged in + Check the antenna connection Ho sound or sound ls tos low at: mad mum volume + Check the volume settings on any external speakers connected to your television + Adjust the TV volume accordingly + Check another channel or input + Check that MUTE hasn't been muted on Ho color, wrong color or tints
Need more information? This is a Quick Start Guide, and while we hope that this has given you the assistance needed for a simple set-up, a full user guide outlining all of this product's instructions and features can be found online ot help.kogan.
