began MADAGASCAR Car Head Up Display Quick Start Glued Table of Contents Overview. Operation... Troubleshooting. Main functions and features « Plug and play functionality across any car * Two mode display: reflect on windshield or view directly on HUD screen « 3.
Wave button Press for 5 seconds to enter menu and to save and exit after making changes. o M » Short pull up: increase setting value Short pull down: decrease setting value Vertical short press: change menu selection é‘" i » Long pull down: turn alarm sound on or off Reset setting: Long pull up and hold. When all LED are illuminated, the HUD has restored factory settings. HUD settings: Since the HUD receives data from satellite, the data will vary slightly from the data displayed on the dashboard.
Methods of pasting the film: 1. Spray some water where the film will be installed and clean with a dry cloth. 2. Remove back side {marked 1) fem the reflective film and paste to the windshield. 3. After fixing, draw a flat object over the film to remove any liquid and bubbles. 4. Remove the protective film (marked 2). If the film cannot display the full information, move the non-slip mat to adjust the position. 1.