9-IN-1 STEAM STICK KASTKSTM09A
SAFETY AND WARNINGS • To provide continuous protection against the risk of electric shock, connect the device to properly grounded outlets only. • Check that the mains voltage corresponds to the voltage indicated on the rating label. See specifications as below: ~220-240V, 50/60Hz, 1300W. • This product is designed for domestic use only. • Do not use at outdoors. • Do not leave the Steam Stick unattended while switched on.
• Never put any cleaning detergents into the Steam Stick. This will make the operation unsafe and may damage the unit. • Never block the steam openings of the product or place it on a soft surface, where the steam openings may be blocked. Keep the steam openings free of lint, hair and other particles. • Use only as described in this manual. Use only with manufacturers recommended accessories. • Do not use in swimming pools containing water.
PRODUCT OVERVIEW 1 Steam switch 8 Aluminium tube 2 15 Power cord 2 Steam regulator 9 Mop head 16 Wall holder 3 Power switch 10 Detergent tank cover 17 Water tank 4 Aluminium tube button 11 Detergent release button 18 Lock button of water tank 5 Upper cord wrap 12 Lock button 19 Measuring cup 6 Aluminium tube 1 13 Lock push button 20 Cloth pad 7 Lower cord wrap 14 Main body 21 Carpet glider
ASSEMBLY 1. Aluminium tube assembly Insert aluminium tube 2 into the aluminium tube 1. Figure 1 2. Mop head assembly Insert the mop head into the assembled aluminium tube and attach the cloth pad to the bottom of mop head. Figure 2 3. Assemble main body Connect the main body to the aluminium tube.
4. Add water in the water tank Add the water in the water tank. Figure 4 5. Assemble the water tank Attach the water tank filled with the water to the main body. The buttons on both of sides must lock with the main body.
6. Use the mop Plug in the Power cord to a grounded electrical outlet, turn ON the power switch, after 20 seconds approximately, the light on the steam regulating mask will change from red to green, then choose steam volume position, finally turn ON the steam switch for use. Figure 6 OPERATION 1. How to use the carpet glider Insert the mop head into the tube, stick the cloth pad on the mop head as per below picture. Then install the carpet glider on the mop head and clean the carpet.
2.
Insert the attachment connection head into the main body as per above picture. Then insert the other accessories by counter clock wise rotation. If need longer handle, you can insert the aluminium tube into the main body and then link the attachment. 3. How to use the wall mount 1.
CLEANING AND CARE 1. 2. 3. Drain the remaining water in the tank after use. Take off the used cloth pad, wash it and dry it in an airy place. Put the power cord on the cord wrap and fix the main body onto the wall holder. TROUBLESHOOTING Problem The appliance is not turning ON. The power indicating light does not light up. The appliance fails to steam. The power indicating light is on. Reason Solution The appliance is not plugged in or household power system problem/fuse is blown.
NOTES
Need more information? This is a Quick Start Guide, and we hope that this has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.
