Contents Components... Overview Basic Operation ., Indicator Light Operation ECO Modes and Game plus Switching Specifications Notes Safety and warnings Read all instructions before using the appliance and retain for reference. 1 2, Unplug the monitor before cleaning it with a slightly damp, clean cloth. ing the screen once it has been turned off with a dry microfiber cloth is recommended. 3. Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
Components A Monitor B Stand Stem € Stand Base D Cable Clip E PM5*1imm Screws (x4) F VASE connectors x 4 G Power Cable H DP Cable (1.
Monitor Controls H Bellybutton: Press to display the OSD menu or enter sub-menus. E Y Down Button: Press to move down in the menus. E A Yp Button: Press to move up in the menus. 0 Bellybutton: Press to exit. H & Power Button: Press to tum the monitor on/off, [ LED Indicator; Change colors to indicate status. Monitor Ports Power Connector: Insert the power cable to supply power to the monitor.
Sop the foam underneath the monitor before attaching the stand. 1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Then take out the stem, cable clip, and base, use the screwdriver {not included) and one screw to fasten base to the stem. mfif)nbla Clay N Stand Stem. ! &Screws x1 2. Remove the foam covering the bottom of the monitor, then remove the converter on the back of monitor. Then use two screws to fasten converter onto the stem. 3.
Wall Mounting 1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the back of the monitor. Press the release button to remove the stand plate. If the mentor was already attached to the stand, remove the stand. 0 U \@I: Relocate button @— Stand Plate Foam 2. Remove the original screws x4 {@D) from the opening in the back of the monitor. 3.
Power Cable Connect the included power cable to the power connector, and then plug the other end into power outlet. (e Power Cable Earphones Plug in your earphones to receive audio signals from your monitor. If your earphones are connected to the monitor and audio devices are connected to your computer at the same time, the audio devices will not produce sound. Earphones and other audio devices not included.
HDMI In order for the monitor to receive HDMI signals farm the computer, use the HDMI cable to connect the monitor to the computer.
Insert one end of the DP cable into your PC’s graphics card, A HDMI cable may also be used, A HDMI cables is not included. 1. Connect the other end of the cable to the corresponding connector on your mentor. DP Connector HDMI Connector 2. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly 3.
The On-Screen Display (OSD) Menu may be used to adjust your monitor's settings and appears on screen after muting on the monitor and pressing the M button. When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer's configuration and parts ste. 1. Press any one of the buttons activate the navigation window. 2. Press M f to enter the OSD menu. 3.
List of Functions Input Source |DP1; NONE Switch to DP signal DP2 ADMIT; NONE Switch to HOMO signal input HDMI Brightness/ Brightness 0~100 Adjust display brightness Contrast Black level 0-100 (Adjust display black level Contrast 0-100 [Adjust display contrast DCR on [Tum on DCR function 3 [Tum off DCR function Color Setting |Gamma Gama 1.
Audio Mute On, Off Tum mute mode on/off Volume: 0-100 Adjust audio volume [Audio Source |DP' ¥ Select audio signal input via HDMI o DP DP2; HDMI § HDMI 2 Smuttiness-Window |Off, PIP Mode, Select PIPPIN modes according to the Window PBP 2 Win Innumerate of input signals etc.
ECO Modes and Game plus Switching 1. Press any one of the buttons activate the navigation window 2. Press Y button to switch Game plus modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other B 3. Press A button to switch ECO modes.
User manuals subject to change without notice. For the latest version of your user manual, please visit Need more information? For full product support and troubleshooting help, head online to help.kogan.com kbgan.
