Contents e Components... .03 Overview Basic Operation ., Indicator Light Operation .. ECQ Modes and Game plus Switching .. Notes Safety and warnings Read all instructions before using the appliance and retain for reference. 1. Unplug the monitor before cleaning it with a slightly damp, clean cloth, 2, Wiping the screen once it has been turned off with a dry microfiber cloths recommended. 3. Contuse cleaning alcohol, ammonia-based liquids or other harsh cleaners.
Components A Monitor B Stand Stem C Stand Base D Bracket trim cover E PM4*12mm Screws (x3) 7B F Disconnectedness) G Power Adapter H 1 User Guide
Monitor Controls I Bellybutton: Press to display the OSD menu or enter sub-menus. H 'V Down Button: Press to move down in the menus, Bl A Up Button: Press to move up in the menus. [ E Exit Bitten: Press to exit. B b Power Button: Press to tum the monitor on/off. O LED Indicator: Change colors to indicate status. Monitor Ports [ Audio Output: Insert one end of the Audio cable into the computer's Audio output to receive the Audio signals from your monitor.
3 Assembly @ Keep the foam underneath the monitor before attaching the stand, 1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table, Monitor Stand Base 2 Take out the bracket and base and lock them together with a screw. PM4*12rmm Screw 3. Take off the upper foam, lock the assembled base with a screw on the back shell fixed base bracket.
4. Take out the bracket decorative cover from the accessory bag and install it into the bracket fixing hole. ,Q Bracket trim cover 5. Use both hands to stand the assembled machine on a flat desktop. 1 Note: do not directly press and hold the LCD screen with your hand during the hols machine’s erection to prevent the screen from breaking.
1. Open the carton, remove the foam, remove the upper foam and remove the decorative cover of the shaft, @ Decorative cover Monitor 2. Locksmith 27.5mm VASE screws in the upper two holes on the rear of the mentor, and the two 17mm VASE screws in the lower two holes. 2o 27.5mmVESAScrews x2 ¢ ¢ 17mm VASE Screws x2 3. Your monitor is now ready te be attached to a wall-mounting bracket. To avoid damage, please do not pinch the screen during bracket installation.
Power Cable Connect the included power cable to the power connector, and then plug the other end into power outlet. Power Cable Earphones Plug in your earphones ta receive audio signals from your mentor. If your earphones are connected to the monitor and audit devices are connected to your computer at the same time, the audit devices will not produce sound. Earphones and other audio devices not included.
DP In order for the monitor to receive DP signals from the computer, use the DP cable to connect the monitor to the computer.
Insert one end of the DP cable into your PC's graphics card, A HDMI cable may also be used, A HDMI cables is not included. 1. Connect the other end of the cable to the corresponding connector on your monitor. HDMI Connector DP Connector 2. Connect the power cable to your monitor then connect the other end to your power source. Iris recommended that you use a surge protector with adequate voltage if wall outlet cannot be reached directly. 3.
Opera The On-Screen Display (OSD} Menu may be used to adjust your mentor's settings and appears on screen after muting on the monitor and pressing the M button. ‘When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration and parts ete. 1. Press any one of the buttons activate the navigation window. 2. Press M fit to enter the OSD menu. 3. Press Yor Ato browse functions.
List of Functions BRIGHTNESS |Brightness 0~100 |Adjust display brightness Contrast 0~100 |Adjust display contrast ECO [Standard, Game, |Set visual mode RTS, FPS, Movie, Text DCR On Tum on DCR function Off 'Tum off DCR function IMAGE Aspect Wide, Auto, 4:3 Set aspect ratio [COLOR TEME[Colortemp.
ECO Modes and Game plus Switch 1. Press any one of the buttons activate the navigation window. 2. Press to switch Game plus modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other scenarios. @ % 3. Press A to switch ECO modes. These modes include Standard, Text, Movie, Game, FPS and RTS modes and can be used to optimize settings according to your activity.
User manuals subject to change without notice. For the latest version of your user manual, please visit Need more information? For full product support and troubleshooting help, head online to help.kogan.com kbgan.
