SAFETY INSTRUCTIONS * Read these instructions. All safety ond operating instructions must be read before this product is operated. + Keep these instructions ~ Retain this manual for future reference. + All warnings on the devise and in the operating instructions must be adhered to. + Do not use this equipment near water. The application must not be used near water or moisture for example, in a wet basement or near a swimming pull. » Clan only with o dry cloth. Do not use solvents or petroleum-based fluids.
PRODUCT OVERVIEW Togo cinch & 15.6" LED Portable Monitor B Case cover € Left speaker D Mini HDMI port E Primary USB-C port {power and video} st F 3.
USING COVER CASE The cover case has a built-in magnet that can be attached to the monitor. Attach the case by following the below steps: N Back side {with one ting} Loge the device LEE? side on the back SIDS, {with two lines) with the LED display foxing up. v Fold the LED side of the cover code over the LED display.
CONNECTION OPTIONS Computer (via USB-C) The portable monitor can be connected to a compatible computer using the supplied USB-C cable. This must be connected to the primary USB-C port on the monitor's left side. The computer will provide power and signal to the monitor and can be used for extended display or duplicated display use.
Computer (via HDMI & power adapter) The second option for HDM! connection is to connect the supplied Ho Mi-to-Mini HDMI cable between the computer and the portable monitor, white also connecting the monitor directly to an external power adopter (supplied) via USB. For this, you can use either the primary USB-C port on the monitor’s left side, or the secondary USB-C port on the me niter's right side.
CONNECTION OPTIONS (cont'd) C Other devices (via HDMI & USB or power adapter} If connecting to « device without o USB-C port, you can utilize HDMI as long as you also provide a power supply. There are two options for this. The first is to connect the supplied HDMI-to-Mini HDM! cable between the device and the portable monitor, while lase connecting to the device via USB to provide power. Connect the USB-A from the device to the primary USB-C port on the monitor's left side.
OPERATION Powering on/eff Crass and hold the power button for 3 seconds te turn the monitor ON and OFF. The monitor will enter power saving mode when turned on unless there is o suitable device connected. Adjusting display brightness and speaks velum The rocker switch on the monitor's right side is used to increase or decrease the volume and adjust the brightness, To enter brightness adjustment settings, tap up on the rocker switch, To enter volume adjustment settings, tap down on the rocker switch.
OPERATION (cont'd) OSD (On Serene Display) setting Language: Change the language of the menus. Q8D Timer: Adjust the amount of time the menu is shown before the display returns to normal operation. Transparency: Adjust how transparent the menus are, Rests Reset: Return the portable display to factory settings. Mute: Toggle the sound On or Off, Volume: Adjust the volume level between 0 and 100, Misc Signal Source: Change the signal source between USB Type C and HDMI.
Addle Packer Dimensions Net Weight With adapter Display Brightness Co lours Contrast Ratio HDR Native As pact Ratio Panel Manufacturer Panel Type Refresh Rate Resolution Size Viewing Angle Features Flicker-free Low Blue Light inputs HDMI 14 USB Type-C Dugouts Headphone Jack Power Power Consumption Standby Consumption SPECIFICATIONS W2 730g 443 x 265 x 47mm 250cd/m2 1B.7M 10004 Yes 16:% Panda 1PS 80Hz 1920 x 1080 15.
TROUBLESHOOTING Problem Solution No dives / replete {LED not i} + Make sure the video cable between the monitor and computer is connected properly and securely. + Use other electrical equipment to confirm that the power outlet is working properly. « Make sure the power button is pressed correctly. Make sure the correct input source is selected through the input source many. Ne dives / Power / lecturers (LED lit) improve brightness and contrast with OSD. Check whether the indicators on the side are normal.
Problem Solution OSD dis not « Turn off the monitor, disconnect and reconnect the appear on the power cord, and tum on the mentor. serene ' : « Check the signal source. Mike sure the computer or No picture, phone is not in sleep mode, indicator Ugh is blue Check that the signal cable is properly inserted. Reconnect the signal cable if necessary. Restart your computer or phone, The picture doss not fill the entire sateen.
CLEANING & MAINTENANCE Before cleaning the monitor, unplug the monitor power cord from the electrical outlet. « When cleaning the anti static screen, slightly dampen a clean, soft cloth with water. If possible, use o dedicated screen-cleaning tissue or solvent for electrostatic coating. Do not use benzene, thinner, ammonia, abrasives, or compressed air. « If you find white powder when you unpack your monitor, wipe it off with a cloth.
Need more Information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online at help.kogan.
