Daim Ntawv Qhia Tus Neeg Siv

Charging

It is highly recommended to fully charge the watch before first use.

1. Lift the rubber cover of the Micro-USB port on the watch. Insert the smaller end of the

Micro-USB cable into the Micro-USB port on the watch.

2. Turn on your computer and insert the larger end of the Micro-USB cable into a spare

USB port on the computer.

3. Once connected, you will see the battery charging symbol shown on the display for

one second and then the data transfer symbol. Select ‘USB Charging’ and ‘OK’. The

battery will continuously charge whilst connected.

4. Monitor the watch regularly throughout the charging process. When the battery is

fully charged, a full battery symbol will show on the display. Disconnect the watch

from the computer.

Notes:

• A full charge takes approximately three hours. The actual time will depend on

the power supply, the remaining charge, and the ambient temperature of the

charging environment.

• The optimal ambient temperature is 0–40°C.

• 5V adapters may also be used to charge the watch.

• If the watch takes longer than three hours to fully charge, try charging from a

different USB power source.

•

Do not use any quick charging adapters.

BEFORE FIRST USE