User`s guide

Operating VRS
VirtualReScan (VRS) User’s Guide
63
8 As an option, you can use the text box instead of the slider to specify the
intensity value. Do one of the following to specify a value from 1 to 5:
 Click in the text box and type in a value.
 Click the arrows in the text box to change the value.
Note If you enable the Advanced Clarity feature and subsequently make
manual adjustments to the brightness and contrast values, the Advanced
Clarity function will be turned off.
9 In the Gamma text box, VRS displays the gamma correction setting. The
correction values range from Dark to Light, with Normal at the midpoint. To
change the setting, do one of the following:
 Click the arrows on the Gamma Correct text box to increase or decrease
the gamma level.
 Click in the Gamma text box and type in a value.
 Move the Gamma slider control left or right to select a value.
10 Click OK.