Technical Manual

Coding Technical Manual CCM10404715 Page 5 of 10
Coding Technical Manual 2020/04
3. Installation
The CCM10404715 is installed following these steps:
- Insert CCM10404715 in the bottle cage on the front door.
- Use two screws to fix CCM10404715 in the bottle cage
- Connect the CCM10404715’s cable to the AJ5 printer
Figure 2 CCM10404715installed in bottle cage.
After installation you can power up the AJ5 printer See AJ5 user manual for more
information.
The 5V power source from the printer to the CCM10404715 is limited to 1A under all
operating conditions. All safety standards according to IEC/EN 62368-1 are met.