Operation Manual
16
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FU-
TURE REFERENCE.
• Before connecting the appliance to a socket
outlet, make sure the voltage indicated on
the appliance corresponds to your local mains
voltage.
• For safety reasons, this class II appliance is
provided with double or reinforced insulation as
indicated by the symbol .
• This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been
given supervision or instruction concerning
use of the appliance by a person responsible
for their safety. Children should be supervised
to ensure that they do not play with the appli-
ance.
• If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or similarly qualified persons in order to
avoid hazard.
• Caution: Risk of injury. The cutting blades are
very sharp. Use care when handling the blades,
emptying the bowl, during cleaning and stor-
age.
• Always disconnect the blender from the supply
when unattended and before assembling,
disassembling or cleaning.
• Do not allow children to use the blender with-
out supervision.
• Switch o the appliance and disconnect from
the supply before changing accessories or ap-
proaching parts that move in use.
• If the blades get stuck, unplug the appliance
before removing the ingredients that block the
blades.
• Only use with the stand provided.
• CAUTION: Ensure that the blender is switched
o before removing it from the stand.
• Do not immerse the motor unit in water
or any other liquid, nor rinse it under
the tap. Only use a moist cloth for cleaning the
motor unit.
• The appliance is intended for household use
only. Do not use the appliance for purposes
other than described in this manual in order to
avoid hazardous situation.
• Do not exceed the quantities and processing
times indicated in this manual.
• Do not use attachments other than recom-
mended by the manufacturer or specified in
this manual.
• When using attachments, make sure they are
connected properly and securely.
• Do not operate this blender longer than
indicated in the user manual when blending
or chopping heavy loads. After this amount of
time, let the appliance cool down suciently
before next operation. None of the recipes in
this user manual constitute heavy loads.
• Never carry or pull the appliance by the supply
cord. Do not pull the supply cord over sharp
edges. Do not jam or bend it.
• Never put the appliance or supply cord on hot
surfaces or near open flames.