Datasheet

Parts No: KSM-200□LN2M

12. Period of Guarantee and Extent of Guarantee

13. Recommand wave solder condition for Lead-free

14. Others

KKC-QM-043-2(B) 6/8

12-3 .This product complies with RoHS directive.

Object : mercury, lead, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl others

12-1.Period of Guarantee

1 year after designated place.

12-2.Extent of Guarantee

KODENSHI Korea Corp. Shall supply the replacements against defects that will caused from KODENSHI fault.

M.M = MACHINE MODEL(Resistance: 0KΩ Capacitor: 200pF)

HBM = HUMAN BODY MODEL( Resistance: 1.5kΩ Capacitor: 100pF)

11-10. This device is not design to endure radiate rays and heavily charged particles.

11-8. To prevent static electricity damage to the Pre-AMP make sure that the human body, the soldering iron is connected

to ground before using

11-9. This device has to control of static electricity

KODENSHI Korea Corp. guarantees a KSM-200□LN2M up to M.M 200V , HBM 2KV

11-7. The decrease in distance, the output noise, the malfunction, etc. might occur because of a surrounding

electromagnetic environment.

In case where any trouble or questions arise, both parties agree to make full discussion covering the said problem

13-1. Pre-heating temperature is 100~120℃, for a duration about 80~110seconds, the speed of raise temperature is 1~2℃/sec

13-2. The peak temperature is 255±5℃, the duration for 3~5seconds.

13-3. The speed of refrigerate is 10℃/sec

13-4. The total time of Wave solder is about 3.5 minutes.

Receiver

Modules

SOURCE