Datasheet

Parts No: KSM-200□LN2M
1. Scope
Th
e
2. Features
◆ Volt supply voltage, low power consumption
◆ Shielded against electrical field disturbance
◆ High immunity against ambient light
◆ Easy interface with the main board
◆ TTL and CMOS compatibility
◆ One mold package
◆ RoHS Compliance
3. Applications
4. Package Outline
5. Absolute Maximum Ratings (at 25℃ Unless otherwise notes)
6. Reliability Test
KKC-QM-043-2(B) 2/8
Note : *1. electro-optical characteristics shall be satisfied after leaving 2hours in the normal temperature
*2. electro-optical characteristics shall be satisfied and no deforms and destructions of appearance.
(excepting deforms of terminals)
Heat Cycle *1 -25℃(0.5H) ∼＋85℃(0.5H) 20cycle
Dropping *2
Test devices shall be dropped 3 time naturally onto
hard wooden board from a 75㎝ height position
High Temperature/High Humidity *1 Ta=＋85℃, 85％RH, Vcc=5V t=240H
Low Temperature *1 Ta=－30℃, Vcc=5V t=240H
Parameter
Condition
High Temperature *1 Ta=＋80℃, Vcc=5V t=240H
Manaul soldering Temperature
Tsol 260(Max 5 sec) ℃
Storage Temperature
Tstg
-25℃∼85℃
℃
Operating Temperature
Topr
-20℃∼80℃
℃
Supply Voltage
Vcc 6 V
and appliances that require remote controlling
See the attached Drawing No. RM-20□□LN□□-ASY-05
Parameter Symbol Ratings Unit
KSM-200□LN2M consist of a PIN Photodiode of high speed and a preamplifier IC in the package as an receiver
for Infrared remote control systems
TV, VTR, Audio, Air Conditioners, Car Stereo Units, Computers, Interior controlling appliances,
2.7 ~ 5.5