Datasheet

Parts No: KSM-200□LM5R

12. Period of Guarantee and Extent of Guarantee

13. Recommand wave solder condition for Lead-free

14. Others

KKC-QM-043-2(B) 6/8

REFERENCE

11-7. The decrease in distance, the output noise, the malfunction, etc. might occur because of a surrounding

electromagnetic environment.

11-8. To prevent static electricity damage to the Pre-AMP make sure that the human body, the soldering iron is connected

to ground before using

11-9. This device has to control of static electricity

KODENSHI Korea Corp. guarantees a KSM-200□LM5R up to M.M 200V , HBM 2KV

12-1.Period of Guarantee

1 year after designated place.

12-2.Extent of Guarantee

13-4. The total time of Wave solder is about 3.5 minutes.

M.M = MACHINE MODEL(Resistance: 0KΩ Capacitor: 200pF)

HBM = HUMAN BODY MODEL( Resistance: 1.5kΩ Capacitor: 100pF)

11-10. This device is not design to endure radiate rays and heavily charged particles.

In case where any trouble or questions arise, both parties agree to make full discussion covering the said problem

KODENSHI Korea Corp. Shall supply the replacements against defects that will caused from KODENSHI fault.

12-3 .This product complies with RoHS directive.

Object : mercury, lead, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl others

13-1. Pre-heating temperature is 100~120℃, for a duration about 80~110seconds, the speed of raise temperature is 1~2℃/sec

13-2. The peak temperature is 255±5℃, the duration for 3~5seconds.

13-3. The speed of refrigerate is 10℃/sec

Receiver

Modules

SOURCE