Datasheet

Parts No: KSM-200LM5R
1. Scope
The
2. Features
Volt supply voltage, low power consumption
Shielded against electrical field disturbance
High immunity against ambient light
Easy interface with the main board
TTL and CMOS compatibility
One mold package
RoHS Compliance
3. Applications
4. Package Outline
5. Absolute Maximum Ratings (at 25 Unless otherwise notes)
6. Reliability Test
KKC-QM-043-2(B) 2/8
REFERENCE
TV, VTR, Audio, Air Conditioners, Car Stereo Units, Computers, Interior controlling appliances,
and appliances that require remote controlling
See the attached Drawing No. RM-200LM□□-ASY-03
Parameter Symbol Ratings
KSM-200LM5R consist of a PIN Photodiode of high speed and a preamplifier IC in the package as an receiver
for Infrared remote control systems
2.7 ~ 5.5
Supply Current / Output Current
Iout 2.5
Unit
Supply Voltage / Output Voltage
Vcc 6 V
Storage Temperature
Tstg
-25℃~85
Operating Temperature
Topr
-20℃~80
Parameter
Condition
High Temperature *1 Ta=80, Vcc=5V t=240H
Manual soldering Temperature
Tsol 260(Max 5 sec)
Heat Cycle *1 -25(0.5H) ~+85(0.5H) 20cycle
Dropping *2
Test devices shall be dropped 3 time naturally onto
hard wooden board from a 75 height position
High Temperature/High Humidity *1 Ta=85, 85RH, Vcc=5V t=240H
Low Temperature *1 Ta=30, Vcc=5V t=240H
Note : *1. electro-optical characteristics shall be satisfied after leaving 2hours in the normal temperature
*2. electro-optical characteristics shall be satisfied and no deforms and destructions of appearance.
(excepting deforms of terminals)