User's Manual

Up/Down --> ENT --> Up/Down (Select ON) --> ENT --> Up/Down & Left/Right --> ENT

ZOOM Setting

(Select ZOOM) | (Move cross cursor)

|--> (Select OFF) --> ENT

----------------

ZOOM canceled

Note 1) VRM2 and EBL2 do not follow the ZOOM function during a floating state.

Note 2) Normal screen returns when you change the range scale.

Note 3) ZOOM function is usable only in PPI screen.

Note 4) ZOOM function is unusable in OFF-C.

Note 5) Center of ZOOM can be set any desired position within the set range.

5.5.3.8 Increasing sensitivity (S/L)

The pulse width is automatically changed as you change the range. However, if you want

to increase sensitivity, you can choose sensitivity from two pulse widths. The short pulse

(SHORT) gives you sharp images with high distance resolution. The long pulse (LONG) provides

high sensitivity and shows targets in large size for easy identification although distance

resolution is reduced.

(1) Use the up-down cursor keys to select S/L from among the pull-down display items, and

press the "ENT" key.

(2) Select Pulse length(SHORT or LONG) using the up-

down cursor keys from the SHORT/LONG display

beside the S/L item

(3) The setting will be completed when the “ENT” key is

pressed after the selection.

Up/Down --> ENT -->(Select SHORT) -------------------- -->

ENT

Set to short pulse

|-->(Select LONG)--> ENT -------------- Set to long pulse

.75

.25

SET ZOOM POINT

.75

.25

.75

.25

indicated S or

ZOOM

blinking "ZOOM"