User's Manual

Note: When PPI+PPI or ALL PPI+PPI screen mode is used, TRACK function can be used

only on CONT mode.

up/down

--> ENT --> up/down ........... ->••select OFF•

-> ENT

TRACK OFF

|---->••select 15SEC• ......................... -> ENT

set 15sec. track

|---->••select 30SEC• ......................... -> ENT

set 30sec. track

|---->•select 1MIN• ........................... -> ENT

set 1 min. track

|---->•select 3MIN• ........................... -> ENT

set 3 min. track

|---->••select 6MIN• .......................... -> ENT

set 6 min. track

|---->••select CONT• .......................... -> ENT

set continue track

5.5.3.7 Enlarging selected areas (ZOOM)

The video image centering around the cross cursor is doubled as it is displayed on the

screen.

(1) Use the up-down cursor keys to select ZOOM from among the pull-down display items, and

press the "ENT" key.

(2) Select the ON using up-down cursor keys from the ON/OFF display beside the ZOOM item,

and press the "ENT" key.

(3) A small cross cursor for setting and "SET ZOOM POINT" are displayed at the screen center

and at the bottom respectively, and the magnification point is to be set. Use cursor keys to

move the cross cursor to the point to be magnified, press the "ENT" key and the setting is

completed. The area around the cross cursor is displayed in 2x magnification, with blinking

"ZOOM" displayed at the screen upper right, indicating that a ZOOM display is being

conducted.

To cancel the ZOOM function, either select OFF in (1) or begin operation of range.

disappear after selecting time

real echo

locus of target

moving

direction

he length of the track

.25

TK 15SEC