V600UserGuide.
V600UserGuide.book Page 2 Tuesday, March 21, 2000 8:26 AM FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
V600UserGuide.book Page iii Tuesday, March 21, 2000 8:26 AM Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 If You Need Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 2 Online Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Faxed Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Telephone Customer Support . . . . . . . .
V600UserGuide.book Page iv Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Safety Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Projector Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Battery Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Specifications . . . . . . . . . . . . . . . . . . . .
V600UserGuide.book Page 1 Tuesday, March 21, 2000 8:26 AM The easy-to-use KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector offer superb image quality at an affordable price. Built into the V600/V600 Zoom Digital Projectors is Kodak’s exclusive Image Manager feature. With this feature, you can select the image display setting best suited for your specific presentation material and projection environment.
V600UserGuide.book Page 2 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector If You Need Assistance The first place to look for help is in “Troubleshooting” on page 24. But you can also get help online, by fax, or by phone. Online Services Contact Kodak via: World Wide Web http://www.kodak.com (click on Service and Support) America Online (keyword) KODAK CompuServe GO KODAK Kodak Internet List Server photo-cd@info.kodak.com; or ftp.kodak.
V600UserGuide.book Page 3 Tuesday, March 21, 2000 8:26 AM If You Need Assistance Telephone Customer Support English If you have questions concerning the operation of your KODAK projector, you can speak directly to a customer support representative. When you call, be at the image source and projector and have the projector serial number ready. In the U.S. and Canada call toll free: 1-800-23K-ODAK 9:00 a.m. and 8:00 p.m. (Eastern Standard Time) Monday through Friday.
V600UserGuide.book Page 4 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Austria/Osterreich 01 795 67000 Int.
V600UserGuide.
V600UserGuide.book Page 6 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Connecting the Projector PC/MAC connection to the computer monitor port PC / MAC S-Video to the S-Video out port S-VIDEO VIDEO AUDIO ~ AC 100V 240V Audio to the source’s Audio out port Video to the Composite video out port Power cord connection to an electrical outlet The cables are color coded to assist you with making the connections.
V600UserGuide.book Page 7 Tuesday, March 21, 2000 8:26 AM Starting the Presentation We recommend turning on the projector and image sources in the order listed here. Note: You might not be using all of these components for your presentation. • • Video source such as VCR, DVD or digital camera. Audio source if different from your video source or computer • Projector • Computer 1. Connect the signal cable to the computer or video source. 2. Connect the power cord to the projector and to a power source.
V600UserGuide.book Page 8 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector 4. Position the projector by using the adjustable feet on the bottom of the projector. Press the foot release buttons on the front of the projector to raise or lower the feet. 5. Turn the focus ring to focus the image and turn the zoom ring (V600 Zoom model only) to zoom in or out on the image. 6. Make any necessary image adjustments by using the on-screen menus.
V600UserGuide.book Page 9 Tuesday, March 21, 2000 8:26 AM Using the Remote Control and Keypad The remote control and projector keypad perform similar operations, with one exception-the remote control has a volume control.
V600UserGuide.book Page 10 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Positioning the Projector The projector should be at least 2.5 feet (.9 m) from the screen but no more than 32 feet (10 m) away from the screen. V600 screen sizes are: Distance Width x Height Diagonal 3’ (.9 m) 18 x 13" (.5 x .3 m) 22.5" (.6 m) 5’ (1.5 m) 31 x 23" (.8 x .6 m) 38.5" (1.0 m) 6.5’ (2.0 m) 40 x 30" (1.0 x .8 m) 50" (1.3 m) 8’ (2.4 m) 48 x 36" (1.21 x .
V600UserGuide.book Page 11 Tuesday, March 21, 2000 8:26 AM Positioning the Projector V600 Zoom screen sizes are: Width x Height Diagonal 3’ (.9 m) 13~17" x 10~13" (.33~.43 x .25~.33 m) 16~21" (.4~.5 m) 5’ (1.5 m) 22~28"x 16~19" (.55~.71 x .41~.48 m) 27~35" (.7~.9 m) 6.5’ (2.0 m) 29~38"x 22~28" (.74~.97 x .56~.71 m) 36~47" (.9~1.2 m) 8’ (2.4 m) 34~46"x 26~32" (.86~1.2 x .66~.81 m) 43~57" (1.1~1.5 m) 9’ (2.8 m) 41~54"x 31~40" (1.0~1.4 x .79~1.0 m) 51~67" (1.3~1.7 m) 10.5’ (3.
V600UserGuide.book Page 12 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Using KODAK Image Manager With one click, Kodak’s exclusive Image Manager lets you choose the best image settings for your presentation type. Important:The KODAK Image Manager settings work best if you select Reset from the Adjust tab each time before selecting an Image Manager setting. 1. Press Menu and use the Adjust + - buttons to move to the Kodak tab. 2.
V600UserGuide.book Page 13 Tuesday, March 21, 2000 8:26 AM Adjusting the Display and Volume Adjusting the Display and Volume English The features available on the Adjust tab depend on your image source. Computer Source Video source Note: We recommend using the KODAK Image Manager to optimize the display. Then, if further adjustments are needed, use the brightness and contrast settings on the Adjust tab. 1. Press Menu and use the Adjust + - buttons to move to the Adjust tab. 2.
V600UserGuide.book Page 14 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Setting Up the Image Source The features that are available on the Setup tab depend on the type of image source that you are using. Computer Source Video Source 1. Press Menu and use the Adjust + - buttons to go to the Setup tab. 2. Use the Next button to select a feature. 3. Use the Adjust + - buttons to select an option for the selected feature.
V600UserGuide.book Page 15 Tuesday, March 21, 2000 8:26 AM Setting Up the Image Source Projection options are front, rear and ceiling. Front projection is used for projecting straight ahead onto a screen. • Rear projection reverses the image if you wish to project from behind the screen. • Use ceiling projection when you attach the projector to a permanent ceiling bracket. (To purchase the optional ceiling mount kit go to our Web site at www.kodak.com/go/projectors.
V600UserGuide.book Page 16 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Selecting a Language The on-screen menus can be displayed in seven languages. 1. Press Menu and use the Adjust + - buttons to go to the Language tab. 2. Press Next to highlight the desired language. 3. Press Enter to select the language.
V600UserGuide.book Page 17 Tuesday, March 21, 2000 8:26 AM Checking the Status Checking the Status English The information displayed on the Status tab depends on the type of image source you use. Computer Source Video Source The Reset Lamp Hours feature is the only item that can be adjusted on this screen. Refer to the Lamp Hours Used when you want to know how much longer your lamp will last. Estimated lamp life expectancy is 2,000 to 4,000 hours.
V600UserGuide.book Page 18 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Turning Off the Projector Turn off the projector and image sources in the order listed here. Note: You might not be using all of these components for your presentation. • • • Computer Projector Audio source if different from your video source or computer • Video source such as VCR, DVD or digital camera. To turn off the projector: 1.
V600UserGuide.book Page 19 Tuesday, March 21, 2000 8:26 AM Transporting the Projector When you place the projector in the carrying case make sure the lens is positioned inside the lens notch of the foam insert. Secure the projector with the velcro strap. velcro strap lens notch foam insert velcro strap Important:The carrying case provided with the projector is not designed to be checked through baggage. If you can not hand carry this projector make sure it is packed properly to prevent damage.
V600UserGuide.book Page 20 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Maintenance Changing the Lamp Module Important:The lamp in the KODAK V600 Digital Projector and the KODAK V600 Zoom Digital Projector contains trace amounts of mercury. Some governments require special disposal of lamps containing mercury. Dispose of lamps in accordance with the law and any applicable local regulations.
V600UserGuide.book Page 21 Tuesday, March 21, 2000 8:26 AM Maintenance English 4. Lift up on the screw side of the lamp module door. Then carefully remove the lamp module cover. 5. Loosen the two slotted screws on the lamp module bracket. 6. Gently lift and pull up on the metal wire to remove the lamp module.
V600UserGuide.book Page 22 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector 7. Carefully place the new lamp module into the projector, with the glass portion facing left. Make sure that it is inserted securely and that the two holes match the two pins of the inner engine case. Tighten the slotted screws. 8. Replace the lamp module door and tighten the screw. 9. Reset the lamp usage counter. See “To reset lamp hours” on page 17.
V600UserGuide.book Page 23 Tuesday, March 21, 2000 8:26 AM Maintenance To ensure proper ventilation inside your multimedia projector, the air filter should be periodically cleaned. More frequent cleaning may be required if you use your projector in a dusty or dirty environment.
V600UserGuide.book Page 24 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Troubleshooting If you don’t find the answer to your problem here, visit our Web site at www.kodak.com/go/projectors for the latest updates on troubleshooting. Power Indicator The power indicator on the keypad provides you with information about the condition of the projector. Light Status 24 Condition Blinking Lamp is off but live power cord is connected to the projector.
V600UserGuide.book Page 25 Tuesday, March 21, 2000 8:26 AM Troubleshooting Problem Solution Color or text is not being projected. Adjust the brightness up or down until the text is visible. Some text or fonts are not sharp with a computer as an image source. For optimal results, set the computer’s resolution to 800 x 600. (Refer to your computer user manual.) But this projector can compress resolutions up to 1024 x 768. Image isn't centered on the screen.
V600UserGuide.book Page 26 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Problem Image appears flat with no contrast Solution To adjust the contrast: 1.Press Menu and use the Adjust + buttons to go to the Adjust tab. 2.Use the Next button to highlight Contrast. 3.Use the Adjust + - buttons to increase or decrease the contrast. Image appears washed out or • Check the projection lens to see if it dark. needs cleaning. • To adjust the brightness: 1.
V600UserGuide.book Page 27 Tuesday, March 21, 2000 8:26 AM Troubleshooting Solution Projected colors don’t match Use the KODAK Image Manager to the computer or video source select a setting that is more acceptable. colors. Important: The KODAK Image Manager settings work best if you select Reset from the Adjust Tab each time before selecting an Image Manager setting. If further adjustment is needed, optimize the brightness, tint, color and contrast from the Adjust tab in the Menus.
V600UserGuide.book Page 28 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Sound Problem Cause and Solution No sound. • Adjust volume. • Verify audio / input connections. • Adjust audio source. Poor sound quality. • Make sure you are connected to the earphone jack on your laptop or line out jack on your desktop. • Make sure the volume setting on your computer is halfway. No audio-out port on the image source.
V600UserGuide.book Page 29 Tuesday, March 21, 2000 8:26 AM Troubleshooting Problem Cause and Solution No light is coming from the • Make sure that the power cord is lamp. properly connected to a fully functional AC electric outlet. The Power light blinks when the power is connected but the projector is not turned on. The Power light is a steady green when the lamp is running. • Make sure that the power cord is properly connected to the projector.
V600UserGuide.book Page 30 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Image Source Problem 30 Cause and Solution The S-Video image source does not appear. Some inexpensive cables are not compatible with the projector. Be sure to use the cable that came with your projector. Only the start-up screen appears and not the image from the image source. • Verify that the cables are connected correctly. See “Connecting the Projector” on page 6.
V600UserGuide.book Page 31 Tuesday, March 21, 2000 8:26 AM Troubleshooting The image source is connected but a No Signal message appears. Cause and Solution • Verify that the cables are connected correctly. See “Connecting the Projector” on page 6. • Verify that the proper image source is connected and that it is selected on the Setup tab of the menus. • Make sure there are no bent pins in the connectors. • Make sure the image source is turned on.
V600UserGuide.book Page 32 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Safety These safety precautions include information to prevent personal injury and damage to the projector. Safety Definitions Warning: Statements identify conditions or practices that could result in personal injury. Caution: Statements identify conditions or practices that could result in damage to your equipment.
V600UserGuide.book Page 33 Tuesday, March 21, 2000 8:26 AM Caution: Never operate your projector without the lamp module or lamp module door. Doing so may damage the projector. Caution: Proper ventilation is important. Don’t block ventilation openings. Never operate this projector in an enclosed area. Do not place the projector on a tablecloth or other soft covering that may block the vents. With ceiling installations, use approved mounting hardware.
V600UserGuide.book Page 34 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector Specifications Specification V600 V600 Zoom Weight in lbs. (kg) 7.5 (3.4) 7.6 (3.4) Dimensions (inches) (WxDxH) 12.8 x 9.8 x 3.6 (with lens) 12.8 x 10.8 x 3.6 (with lens) Dimensions (mm) (WxDxH) 325 x 250 x 92 (with lens) 325 x 275 x 92 (with lens) Color Palette 16.7 million (24 bit) 16.
V600UserGuide.book Page 35 Tuesday, March 21, 2000 8:26 AM Specifications Projection Distances/ Image Sizes V600 0.9 m (2.95 ft) 0.57 m (1.875 ft) 3.66 m (12 ft) 2.29 m (7.5 ft) 10 m (32.8 ft) 6.35 m (20.6 ft) V600 Zoom 0.9 m (2.95 ft) 0.4 m (1.33 ft) to 0.53 m (1.74 ft) 3.66 m (12 ft) 1.68 m (5.5 ft) to 2.19 m (7.17 ft) 10 m (32.8 ft) 4.67 m (15.3ft) to 6.1 m (20 ft) Projection Lens Fixed/manual focus Manual zoom/focus Zoom Factor N/A 1.
V600UserGuide.
V600UserGuide.book Page 37 Tuesday, March 21, 2000 8:26 AM Warranty WARRANTY TIME PERIOD English Kodak warrants the KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector (excluding lamps, which have an initial 90-day warranty from the date of purchase) to be free from malfunctions and defects in both materials and workmanship for two years from the date of purchase. WARRANTY REPAIR COVERAGE This warranty will be honored within the geographical location that the product was purchased.
V600UserGuide.book Page 38 Tuesday, March 21, 2000 8:26 AM KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector HOW TO OBTAIN SERVICE Please refer to the Service and Support section of your User’s Guide for the support hotline designated to your location. When returning a digital projector for repair, the unit shall be packed in its original packing materials. A problem report should also be enclosed with the equipment.
V600UserGuide.
V600UserGuide.book Page 40 Tuesday, March 21, 2000 8:26 AM Eastman Kodak Company 343 State Street Rochester, New York 14650 Kodak is a trademark of Eastman Kodak Company.
