User Manual

35
Press and hold the and buttons on the remote control at the same time until pairing is successful.
While pairing, the remote control shall be closer to the camera.
Repeat the above setup for each camera.
Each camera must be set to the same channel, one remote control can control 5 cameras simultaneously at most.
2. Set the desired shooting mode (movie mode or snap shot photo mode ) and the display mode (Globel or Front ).
Other parameters are set the same as the current settings of the camera at the same mode.
3.. Press the button on the remote control to start shooting or recording, and press the button again to stop recording.
4. To terminate remote control, just press the button on the "Remote Off" interface.