User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
18
Installing and Dismantling the Lens Cover
Two types of replaceable lens covers are
provided for the product.
Standard Lens Cover:
Applicable for general use. Do not use
underwater.
Visual angle in the air is about 160°. Will not
focus underwater.
Underwater Lens Cover:
Applicable for use in water.
Visual angle in the air is about 130°, and
visual angle in water is about 90°.
Steps for dismantling the lens cover:
1. Hold the product with your left hand, and
pull the lens buckle with your nger to the
left end as illustrated in the picture. Hold
the lens cover ring with your right hand
and rotate to the OPEN arrow direction.
2. When three alignment points are in a
straight line, loose your left hand from the
lens buckle, and remove the lens cover
from the right with your right hand.
①
②
Alignment Points