User manual

24
approximately 1/50 second; an M-2 bulb has a flash
duration
of approximately 1/100 second, thus pro-
viding effective stopping
of subject movement if most
of the exposure light is provided by the flash.
3. Estimate carefully the distance in feet you are from
the subject and set the lens accordingly.
4. Obtaining Exposure From Exposure Value Card
a. Slip the proper exposure card into the holding
frame, with the Flash Setting side out.
b. Determine the exposure value from the distance
in feet to the subject and the type flash bulb used.
c. Transfer the exposure value to the shutter speed
ring being sure the speed
is 1/ 30 sec.
s. Rold the camera steady; then press the release lever
aIL the way down with a slow squeezing action.